Ineffable Wingbolt Dahak Posted July 25, 2004 Share Posted July 25, 2004 See picture, then check the terrain definition & question. begindefineterrain 429; clear; te_name = "Steps"; import = 289; te_which_sheet = 761; te_which_icon = 0; te_height_adj_pixels = 10; te_suppress_floor = 0; I can't figure what is causing the blackness circled in blue. I've tried changing options in the terrain definition, but with no success. Any ideas? EDIT: After fooling around I found the problem. Any terrain sporting a te_special_property equal to 25, 29, or 30 will suppress the northern cliff face. I'm e-mail Jeff to ask for a fix/alternative. For the west cliff face, properties 19, 27, 28 will suppresss the cliff face Link to comment Share on other sites More sharing options...
Garrulous Glaahk Isaac Posted July 26, 2004 Share Posted July 26, 2004 You could make a custom graphic for the step terrain that includes part of the cliff face graphic. Link to comment Share on other sites More sharing options...
Ineffable Wingbolt Dahak Posted July 26, 2004 Author Share Posted July 26, 2004 I did finally. Pity. I try to avoid that as much as possible. Link to comment Share on other sites More sharing options...
Recommended Posts